Supercritical fluid extraction-capillary gas chromatography: On-line coupling with a programmed temperature vaporizer

A simple and versatile system is described for the on-line coupling of SFE to capillary GC. The interfacing consists of a programmed temperature vaporizer (PTV) injector. With this injector it is possible to combine solute trapping, elimination of a high flow of extraction fluid, and quantitative transfer of solutes to the seperation column. The problems caused by impurities in the extraction fluid in on-line SFE-GC are discussed. Simple methods are described for the purification of commercially available carbon dioxide. The trapping efficiency of the PTV injector is studied. Applications of the SFE-PTV-GC system are given for the analysis of polymer anti-degradants, polar compounds, and samples with environmental relevance.     

The determination of ammonia in flue gas from the selective catalytic reduction of nitric oxide with ammonia

The emission of NO_x from coal-fired boilers can be limited by means of the selective catalytic reduction of NO_x with ammonia. The amounts of unreacted ammonia downstream should be low to avoid processing and environmental problems. Continuous measurement of the ammonia in the flue gas is needed. The determination of ammonia and flue gas sampling techniques are discussed. Measurements of ammonia in exhausts of a laboratory reactor and of a pilot plant for the selective catalytic reduction of NO_x with ammonia are presented. Ammonia was determined by mass spectrometry and chemiluminescence in the gas phase, and by spectrophotometric (Nessler and Berthollet reactions) or potentiometry in aqueous solution, in low (<5 μl l^?1) and high (<1000 μl l^?1) concentration ranges.     

Automated determination of fatty acid methyl ester and cis/trans methyl ester composition of fats and oils

The determination of the fatty acid composition (as methyl esters, FAMEs) of fats and oils and their cis/trans (CTME) distribution requires a simple, but manual and time-consuming sample preparation. The so-called BF3 method is often the preferred procedure. Because FAME/CTME analyses are encountered very frequently in the food industry, an automated, robot-based alternative is proposed which uses the sodium methylate procedure. After sample weighing and the (manual) addition of heptane (2 min), a XYZ robotic autosampler is used for all remaining work, which includes reagent addition, agitation, sample settling and the final injection into the gas chromatograph (10 min). The performance of the sodium methylate and BF3 methods are compared by analysing some 30 oil and fat samples. The novel procedure is much faster (less than 15 min versus ca. 1 h) and manual sample handling is drastically decreased. The experimental results obtained with the two methods frequently are the same, while small differences can be explained by (known) differences of the two methods in the conversion of minor oil/fat constituents, such as free fatty acids, wax esters and sterol esters. In case of FAME analyses, a hot injection is to be preferred over a cold injection. The RSDs of the peak areas were 1.5% for the major fatty acids to 11% for peaks that were just above the noise level. The detection limit were approximately 0.03%.     

Investigation of parameters affecting the on-line combination of supercritical fluid extraction with capillary gas chromatography

Two different injectors, a split/splitless injector and a programmed temperature vaporizer (PTV) injector were investigated as the interface in on-line supercritical fluid extraction (SFE)-capillary gas chromatography (cGC). The parameters affecting the chromatographic peak shapes as well as the quantitative performance of the interfaces in on-line SFE-cGC were identified and studied. Particular attention was paid to the case where modified extraction fluids were used. Experiments were performed on two different samples. The first sample consisted of PAHs spiked on sand at different concentration levels. The other sample was a polymeric material.     

(Eta3-phenylallyl)(phosphanyloxazoline)palladium complexes: X-ray crystallographic studies,NMR investigations,and Ab initio/DFT calculations

All possible (eta(3)-allyl)palladium complexes (1-4) of the ligand (4S)-[2-(2'-diphenylphosphanyl)phenyl]-4,5-dihydro-4-(2-propyl)-oxazole (L 1) and eta(3)-allyl ligands with one to three phenyl substituents at the terminal allylic centers were synthesized and characterized by X-ray crystal structure analysis and, with respect to allylic isomers, by NMR investigations. Equilibrium geometries, electronic structures, and relative energies of isomeric complexes were computed by restricted Hartree-Fock (RHF) and density functional theory (DFT) calculations; experimentally determined isomer ratios could be reproduced. The results allowed important conclusions to be drawn regarding the mechanism of Pd-catalyzed asymmetric allylic substitutions.     

On the escape process during phase inversion of an emulsion

This paper deals with a phenomenon which plays an important role in the phase inversion process of emulsions. This process is governed by the interplay of coalescence of droplets, often leading to double emulsions, and the escape of those internal droplets. The latter process retards the inversion process. Coalescence has been the subject of many studies, contrary to the escape event. This paper addresses the escape process both theoretically and experimentally. The model developed analyses the rate of the escape of internal droplets from the mother droplet via a coalescence process, where the internal flow, as generated by the external flow, generates the viscous force for coalescence. Incomplete mixing in the droplet has been assumed. Experimental data on the escape rate of oil droplets from O/W/O emulsions have been analysed using a Computational Fluid Dynamics approach, where the model as indicated above has been incorporated. Experimental data and simulations compare very well. Data have been compared on varying the size of the inner droplets and the rotational speed of the vessel where the double emulsion has been formed and where the escape took place.     

Synthesis,optical, and electrochemical properties of novel copolymers on the basis of benzothiadiazole and electron‐rich arene units

Novel alternating conjugated copolymers ( P1–P6 ) consisting of an electron‐deficient benzothiadiazole and a variety of electron‐rich thiophene‐arene‐thiophene units were synthesized by palladium‐catalyzed polycondensations (Stille and Suzuki reactions), aiming at processable materials with a reduced optical band gap. The structures of P1–P6 were confirmed by ¹H NMR and ¹³C NMR, and their molecular weights were determined by size exclusion chromatography. In the Suzuki polycondensation, the role of the catalyst [Pd(PPh₃)₄ and Pd(OAc)₂] on the resulting molecular weight was investigated. Pd(OAc)₂ enhances the molecular weight of the polymers for both thiophene and phenylene bis‐boronic esters as compared with Pd(PPh₃)₄. The optical properties of the polymers were examined in solution and the solid state. The polymers with n‐octyl substituents ( P1 , P4 , P5 , and P6 ) on the thiophene rings possessed less‐planar structures as a result of torsional steric hindrance, and their absorption spectra appeared blueshifted as compared with their unsubstituted analogues ( P2 and P3 ). The electrochemical properties of the polymers were studied using cyclic voltammetry. Although the alkyl substitution affects the oxidation potential, only marginal differences in the reduction potentials were observed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2360–2372, 2002     

Deactivation of silica surfaces with a silanol-terminated polysiloxane; structural sharacterization by inverse gas chromatography and solid-state NMR

Retention gape deactivated with Silicone OV-1701-OH show good chromatographic performance and remarkable stability against water induced stationary phase degradrdation. In an attempt to better understand the findamentals off the deactivation process using silanol terminated polysiloxanes, a fumed silica was deactivated with Silicon OV-1701-OH. In contrast to fused silic capillaries, fumed silica (Aerosil A-200) can be studied by ²⁹Si cross-polarization magic-angle-spinning (CPMAS) NMR, thus serving as a model substrate for fused silica. Retention data from inverse gas chromatography at infinite dilurion and ²⁹Si CP MAS NMR data of five Aerosil phases, differing in residual silanol surface concentration, are correlated with the aim of validating this approach for stationary phase characterization. A comparatively detailed model of the deactivating polymer layer that explains the observed absorption activities is deduced. Surface silanols are shown to play a key role in the polymer layer, the structure of which is of primary importance for the absorption behavior after deactivation. Contrary to common belief, the absolute silanol surface concentration after deativation is only of secondary importance for the overall absorption activity. High silanol surface concentrations enhance degradation of the polysiloxane chains into small cyclic fragments as well as subsequent absorption and immobolization to the silica substrate surface. The mobility of linear polysiloxane chains in the kHz regime (as determined bby NMR cross-polarization dynamics) appears to determine the extent which the residual silanols are accessible for analytes. It is therefore anticipated that there is an optimum silanol surface concentration of fused silica surfaces to be deactivated with silanol terminated polysiloxanes; it should be lazrge enough to adsord polymer fragments, but not large to avoid excessive residual silanol activity.     

Carbon skeletal rearrangements in 2-phenylthiophene and 2,5-diphenylthiophene under conditions of electron-impact

The mass spectra of ¹³C-labelled 2-phenylthiophenes and 2,5-diphenylthiophenes were studied. The label distributions for the [HCS]⁺, [C₂H₂S]^+·, [C₈H₆]^+·, [C₉H₇]⁺ and [C₇H₅]S⁺ ions from 2-phenylthiophene and the [HCS]⁺, [C₉H₇]⁺, [C₇H₅S]^+·, and [C₁₅H₁₁]⁺ ions from 2,5-diphenylthiophene were interpreted in terms of both carbon skeletal rearrangements in the thiophene ring and migration of the phenyl substituent. The degree of carbon scrambling in the thiophene ring appeared to be almost independent of the electron beam energy. The formation of some of the fragment ions studied seems to be so fast that no carbon scrambling could be detected at all; in neither case was complete scrambling of the carbon atoms of the thiophene ring observed.     

Improved method for the determination of sulfur components in natural gas

Determination of trace concentrations of sulfur components in natural gas is a true analytical challenge. Only analytical procedures based on gas chromatography can meet the sensitivity and accuracy requirements dictated by environmental regulation institutions and modern chemical industry. In the present contribution the sample pretreatment and chromatographic separation steps have been evaluated and optimized based on the use of a flamebased sulfur chemiluminescence detector (SCD) for target compound detection. The proposed instrument consists of a programmed temperature vaporizing (PTV) injector employing a liner packed with Chromosorb 104, a 4 μm thick film apolar column and a flame-based SCD. Using a 13 mL sample loop the detection limit achievable with the new method is 3 μg S/m³. The precision of replicate measure. ments is generally in the range of 5–15% relative standard deviation. Lower detection limits can be achieved by preconcentrating larger sample volumes, e.g. 100 mL.